Instructions
Need help with your Ride?
We are proud to offer a 1/2 hour of FREE phone support with ANY purchase.
​
How To Use Your ZapStrap Charge & Ride System
​
The ZapStrap charge and ride kit will arrive fully built.
​
1. Charge The ZapStrap using the provided wall charger. Light on wall charger should come on while charging. Light will shut off when fully charged.
​
2. Connect The ZapStrap to The ZapConverter. ZapConverter numbers will light up.
​
3. Click the "SET" button to the alternate between voltage and amperage settings.
(Check the back of the charger provided with your electric vehicle if unsure of voltage and amperage)
​
4. Connect The Leash to The ZapConverter.
​
5. Connect The Leash to the charging-port of your electric vehicle.
(You may need to do the Vamp. Mod for this step. See video below)
​
6. Click "OK" button on The ZapConverter to charge your electric vehicle.
​
7. Get on your electric vehicle and enjoy your new freedom.
​
​
​
How To Use Your ZapStrap Parallel and Ride System
​
1. Locate your charger provided with your EV. Read the information on the back to Confirm the voltage matches the voltage of your ZapStrap.
​
2. Charge The ZapStrap fully using your charger or the one you received from us.
​
3. Charge your EV fully.
​
4. Use the ZapMeter to confirm they are at the same full charged status.
(Note*ZapMeter works great during charging to see status)
​
5. Connect TheLeash to the charging-port of your electric vehicle or in parallel directly to your battery.
​
6. That's it!! You just upgraded your EV to a larger battery.
7. Go ride and enjoy that new amperage!
​
We suggest leaving it connected all the time as the ZapStrap and your EV must be close in voltage prior to connecting. (within a few volts is fine).
​
You can even charge them at the same time using a splitter!
​
​
​
​
​
​
​
​